Filter Logic FFL-190W Compatible Whirlpool 4396508 WPro 484000008726 Everdrop EDR5RXD1 Water Filter

The Filter Logic FFL-190W compatible for Whirlpool 4396508 SBS002 Refrigerator Water Filter fits Whirlpool, Amana, Ariston, Jenn-Air, Kenmore, KitchenAid, Maytag, side-by-side refrigerators with an internal quarter-turn, horizontally placed, water filter located in the plinth grill below the refrigerator doors.

* Please note this is a compatible spare part and the manufacturers names and part numbers have been used for compatibility and comparable purposes only.

FilterLogic FFL-190W Part Numbers:

Filter Logic FFL-190W is a compatible replacement part that can replace, these Whirlpool* KitchenAid* Maytag* and other brand, filter part numbers:
Whirlpool 4396508 | 4396508P | 4392857 | 4396509 | 4396510 | 4396918 | 4396163
WPro 484000008726, 504574224383, SBS002, SBS200, S20BRS, 8212652, NL240V, NLC240V
EveryDrop Filter 5, EDR5RXD1,
Amana GC2027GNKBS
AquaFresh WF285SGF-W01 SGF-W80
Hotpoint 461950266841 | 461950271191
KitchenAid 4396547 | 4396163
Maytag 8212652
PUR 723987008028 | QTSS
Purtec RF60
Smeg SA550F All Base Grille Filters
Seltino SWP-508
Sentinel WSW-2
Supco WF285
Swift Green SGF-W80
Water Specialist WSW-1
Zuma OPFW-RF300
The FFL-190W will also fit some Ariston models such as MSZ802DF and MSZ801D.

FilterLogic FFL-190W Features:

Filter Logic FFL-190W Water Filter improves water quality and taste.
• High quality: High Quality Activated Carbon
• Reduces Impurities: Chlorine, Particulates, Turbidity, Odour, Impurities, and Contaminants
• Tested and certified: by WQA to NSF/ANSI 42 for material safety, integrity, chlorine reduction
• Tested Lead Free: Tested to NSF/ANSI 372 for lead free compliance.
• European Standards Copmpliance: Tested in Italy compliant with European standards EC 1935/2004
• BPA free

does not remove minerals that may be beneficial to your health such as fluoride.

Filter Logic FFL-190W Instructions

Do not use any tools to install this filter
1. It is suggested that before you remove the old water filter, turn off the water supply to your refrigerator and then dispense some water to reduce the water pressure and depressurize the system. This makes it easier to change the water filter.
2. Twist the old filter a quarter-turn counterclockwise
3. Pull the filter straight out (don’t worry, the water will shut off automatically)
4. Remove the colour-keyed knob from the end
5. Discard the old filter
6. Slide the knob onto the end of the new filter
7. Push the new filter into the fridge receptacle until it stops, this may require a firm push
8. Twist the filter a quarter-turn clockwise
9. Reset your change filter light (if your fridge has one)
10. Dispense water for about 3 minutes ( 4 to 6 litres) and discard, until water runs clear. This will remove any harmless loose carbon fines and purge air from the system. Some noise may be heard as air is purged from the system.
11. If the filter sits for a week or more without use, flush several litres of water through the filter to remove stale water from the refrigerator water lines.
12. Resetting your filter change indicator. Follow the instructions in your user manual. The procedure may require pressing the light switch (the one the refrigerator door presses every time you close the door) 5 times within 10 seconds or if your refrigerator has a filter button, press and hold for 5 – 10 seconds.

Note: The filter must be pushed firmly into the receiver and turned until the filter is locked in place. If the filter is not locked correctly, water may not flow or may slowly leak.

This filter is made by indepoendant brand FilterLogic. Other names or trademarks used belong to their respective owners and have been used solely to indicate the purpose of the part only.

© All rights reserved, Zdirect.nz, Auckland, New Zealand