Aqua Blue 10102 suits Zenith Zip 93701 93702 93704 water filter
$116.90
Aqua Blue 10102 suits Zenith Zip 93701 93702 93704 water filter
Aqua Blue 10102 water filter may be used as an aftermarket alternative replacement for these Zenith/Zip part numbers:
93701NZ, 93701, 93702NZ, 93702, 93704NZ, 93704
Availability: 4 in stock
| 1 | 2 | 3 | 4-5 | 6+ |
| $116.90 | $113.39 | $112.81 | $112.22 | $111.06 |
Aqua Blue 10102 is a Comparable Alternative water filter for:
Zeneth* Zip* 93701 93701NZ 93702 93702NZ 93704 93704NZ.
Ensure fresh, clean, great tasting water. Improves the aroma and flavour of beverages by removing chlorine and impurities.
The Aqua Blue 10102 aftermarket cartridge is a cost effective and high quality alternative choice for the G4 Hydrotap* water filter system manufactured after February 2017
Aqua Blue 10102 comparable water filter Features:
- Compatible with heads that take Zeneth and Zip 93701 93702 93704 water filter.
- Triple action – Reduces: Sediment, Scale, Chlorine Taste and Odour
- WaterMark compliant AU/NZS standard 3497
Aqua Blue 10102 Part Numbers:
Aqua Blue 10102 water filter may be used as an alternative replacement for these part numbers:
93701NZ, 93701, 93702NZ, 93702, 93704NZ, 93704
For some water supplies 0.5 microns may be subject to premature blocking unless a sediment pre filter is used.
For a higher micron option see SAP-13 which is 5 microns.
SAP-13 is preferred and recommended for commercial use or on water supplies with higher sediment.
Why Aqua Blue water filters?
Aqua Blue water filters have been designed with performance in mind and are manufactured to the highest standards of product quality.
Operating Specifications
• Temperature: 2 – 38°C.
• Pressure: 172 – 860 kPa.
• Flow rate: 3.8 L/min.
• Capacity: 6,800 Litres.
Filter Replacement Instructions:
1. Shut off the water supply.
2. Grasp existing filter and remove by rotating left until it stops and pull down releasing it from the filter head.
3. Align replacement filter guide channels with the corresponding posts of the filter head.
4. Insert the filter upward until it fully seats into the head, then rotate right until it stops.
5. FLUSH 10 litres of water through the filter before use, or until water runs clear. This essential flushing process removes air bubbles and loose carbon fines before use.
* Disclaimer: This is an aftermarket compatible spare part by independent brand AB,
It is not the manufacturers original. Any other manufacturer names and/or trademarks used remain the property of their respective owners and have been used only for comparison and to identify the purpose of the part or product.
