Waterdrop F-48 water filter in a convenient economical 3 Pack
Waterdrop F-48 is a high quality compatible alternative replacement for:
Fisher & Paykel 868686 FWC5 | Haier HRXWF H0060869187 | GE XWF | Refrigerator Water Filter.
Waterdrop F-48 Removes chlorine, chemicals and contaminants from your drinking water resulting in clean fresh great tasting water
May be used with Fisher & Paykel Refrigerator Models beginning with RF500Q and
Haier HRF580YP and HRF680YP models.
Important: Please check your filter for the part number before purchasing.
Waterdrop F-48 Refrigerator Water Filter Features:
- Reduces: chlorine, chemicals, heavy metals. and contaminants
- Reduces Bisphenol A (BPA) Lead Mercury
- Reduces Cysts
- Perfect fit: made from an advanced industrial automation system and precision measurement technology
- Tested to meet NSF/ANSI Standards 42, 53, 401
Waterdrop F-48 Compatible Part Numbers:
- Waterdrop F-48 can be used as a compatible alternative replacement for the following part numbers:
- Fisher & Paykel: 868686, FWC5, FP-XWF
- Haier: HRXWF, H0060869187 |
- GE: XWF (NOT XWFE with chip)
- Aftermarket: EcoAqua EFF-6048AK
Waterdrop F-48 can be used in Refrigerator Models:
Fisher & Paykel Refrigerator Models beginning with RF500Q; and
Haier HRF580YP_ [ HRF580YPC HRF580YPS ] and HRF680YP models
IMPORTANT: Please ensure you Check your exisiting Water Filter for the correct part number before purchasing.
Waterdrop F-48 Refrigerator water Filter Specifications:
- Capacity: 757 litres (200 US gallons)
- Flow Rate Maximum: 2.46L/min (0.5GPM)
- Filter Life: Recommended change interval 6 months for optimal water drinkability and flow. Change earlier if capacity used or flow declines.
- Min / Max Working Pressure: 207 – 689kPa (30-100 psi)
- Min / Max Operating Temperature: 1 – 38 degrees C° (33F-100F)
- Micron Rating: 1 micron
Installation Tips and Instructions:
- Squeeze the two front tabs of the filter housing and pull down gently to reveal the cartridge.
- Line up the ports on the top of the filter with the ports in the cartridge holder and gently insert.
- Slowly turn the filter approximately 90 degrees(1/4 turn) anticlockwise until it stops. Do not overtighten. As you turn 1/4 anticlockwise, the arrow on the filter should align with the arrow on the cartridge holder.
- Slowly push the filter back up into the housing clips
- Close the housing by gently pushing the cover upward until the tabs lock into place.
- Run water through the dispenser for up to 3 minutes or until water runs clear.
- Reset your fridge filter indicator light using the instructions in your fridge manual.
PLEASE NOTE: This is a Compatible Alternative Replacement Refrigerator Water Filter by independent brand Waterdrop. It is not the manufacturers original. Other names and/or trademarks for are used for comparison and to identify the purpose of the part only.